Hayward Widemouth Butterfly Gasket | SPX1091GW

HAYWARD | WIDEMOUTH BUTTERFLY GASKET | SPX1091GW

GENERAL DESCRIPTION:
THIS IS A HAYWARD PRODUCTS ABOVE GROUND WIDEMOUTH SKIMMER FACEPLATE GASKET
THIS IS A RUBBER BUTTERFLY TYPE GASKET

THIS IS ACTUALLY 2 GASKETS JOINED AT THE INSIDE HOLE
THE INSIDE GASKET SLIPS THRU THE WALL SKIMMER OPENING AND THE OUTSIDE
GASKET STAYS ON THE OTHER SIDE OF THE WALL.

THIS IS ALSO KNOWN AS A WALL PROTECTION GASKET, SINCE THE GASKET HELPS
PROTECT THE WALL OPENING

MATERIAL:
WHITE RUBBER

SHAPE: RECTANGULAR WITH A TOTAL OF 24 HOLES
THERE ARE 9 HOLES IN THE TOP AND THE BOTTOM
THERE ARE 3 ADDITIONAL HOLES ON EACH SIDE.

THE HOLES ARE SLIGHTLY WIDER THAN TALL (3/-8" x 1/4")

*******************************************************************************
DIMENSIONS:

OUTSIDE LENGTH: 13-7/8" (A)
OUTSIDE HEIGHT: 7-1/2" (B)

INSIDE LENGTH: 12"
INSIDE HEIGHT: 5-1/4"

*******************************************************************************
HOLES:
THESE MEASUREMENTS ARE FROM THE HOLE CENTER TO HOLE CENTER

TOP AND BOTTOM:
THERE IS A SCREW HOLE IN THE CENTER
THE 2 SCREW HOLES NEXT TO THE CENTER HOLE ARE 2-3/8" FROM THE CENTER HOLE
THE NEXT 2 HOLES ARE EXTRA HOLES, 1" FROM THESE HOLES
THE NEXT 2 HOLES ARE SCREW HOLES, 1" FROM THE EXTRA HOLES
THE OUTSIDE SCREW HOLES ARE 2" FROM THESE

SIDE:
THERE IS AN EXTRA HOLE IN THE CENTER
THERE IS A SCREW HOLE ABOVE AND ONE BELOW THE CENTER HOLE
THESE ARE 1-1/16" FROM THE CENTER HOLE
THE SCREW HOLES IN THE CORNERS ARE ABOUT 2-1/8" FROM THESE HOLES

*******************************************************************************
MARKINGS:

THERE ARE NO MARKINGS

*******************************************************************************
SUBSTITUTES:
THERE ARE 3 GASKETS THAT WILL REPLACE THIS
THE HOLE PATTERNS ARE THE SAME, BUT THESE JUST DON'T HAVE THE EXTRA
CENTER HOLE IN THE MIDDLE OF EACH SIDE
OUTSIDE AND INSIDE DIMENSIONS MAY BE VERY SLIGHTLY DIFFERENT

4020-36 PENTAIR / STA-RITE
4095-051 WATERWAY
4031-080 PENTAIR

NOTE DATE: 5-7-2009