HydroQuip

HydroQuip HeatMax Heater 240V 11KW RHS Remote Heater System Series | RHS-11.0

IN STOCK
SKU: RHS-11.0
IN STOCK
SKU: RHS-11.0
MSRP: $785.99
$654.74
(17%​ off)
(You save $131.25 )
Availability: Out of Stock
Weight: 1.00 LBS
GTIN: 682470339578
MPN: RHS-11.0
SKU: RHS-11.0
Warranty: 1 year warranty from the manufacturer

The HydroQuip RHS-11.0 is a stand-alone heater with 11kW of wattage and a 240-volt voltage level. It features a 2" inlet and outlet size, making it suitable for use with standard pumps or filters. The entire unit measures 15" in length, making it compact enough to fit into tight spaces. It also features a 2-1/4" U-shaped heater housing made of stainless steel, which ensures maximum durability and long life.

The HydroQuip RHS-11.0 is equipped with a full-range thermostat and high limit and pressure switch protection to ensure safety during operation. The differential thermostat works in tight increments to ensure accuracy and efficient operation. Additionally, the unit comes with an indicator light that lets you know when the heater is on. The HydroQuip RHS-11.0 also offers detailed instructions in its manual for easy operation and maintenance. With all of these features, this Heater provides a reliable solution for your home or business's pool or spa needs.

  • Full range thermostat
  • Heater "On" indicator light
  • Tight differential thermostat
  • Detailed operation manual
  • 2" unions on inlet and outlet ports
  • High limit and pressure switch protected
  • 11.0kW dual heater in 240v operation
  • 2.25" high flow U-shaped heater housing
  • Stainless Steel Heater Housing and Weather-Tight Construction

Additional Information:
Alternate part numbers - 463551100, HEATMAX RHS-11.0, RHS110, 46-355-1150, HQP-85-8532, HQRHS110, 9287A

avatar
Popular Questions

1 year ago
Are there any safety features built into the 58083 Balboa Heater Assembly, such as automatic shut-off or overheat protection? See more »
1 year ago  •  Staff Answer
The 58083 Balboa Heater Assembly features a high-limit temperature sensor that automatically shuts off the heating element if the water temperature gets too high, thus preventing overheating. Additionally, the heater assembly is designed with a pressure switch that prevents operation if there is inadequate water flow, which can lead to damage to the heating element. These features ensure safe and reliable operation of the heater assembly.
0 | 0
1 year ago
1 year ago  •  Staff Answer
The 58083 Balboa Heater Assembly is 15.5 inches long, 2 inches wide, and 15.5 inches high. It weighs approximately 6.6 pounds. The installation process may vary depending on the spa system and the expertise of the person installing it, but generally, it is a straightforward process that involves connecting the appropriate wires and sensors. It is recommended that a qualified technician install the heater to ensure proper installation and avoid any potential hazards.
0 | 0
2 years ago
2 years ago  •  Staff Answer
The time it takes for the 58083 Balboa Heater Assembly to heat up the spa water to the desired temperature will depend on several factors, such as the initial temperature of the water and the desired temperature setting. Generally, it takes a few hours to raise the water temperature by a few degrees, but it may take longer to reach higher temperatures. As for energy efficiency, the 58083 Balboa Heater Assembly is designed to be energy-efficient, using a high-performance heating element and advanced control features to optimize energy consumption.
0 | 0
1 year ago
Is this the correct part for a Kohler, 1257–0 Mariposa Jacuzzi tub? See more »
View all

Shopper Approved Q&A Shopper Approved Q&A Answerbase
view