Pentair Clamp Without Knob | 25010-9101

Pentair

Pentair Clamp Without Knob | 25010-9101

IN STOCK
SKU: 25010-9101
IN STOCK
SKU: 25010-9101
MSRP: $185.99
$168.74
(9%​ off)
(You save $17.25 )
Product Specifications
Availability: Out of Stock
Weight: 1.78 LBS
MPN: 25010-9101
SKU: 25010-9101
Warranty: 1 year warranty from the manufacturer
product Details

PENTAIR | CLAMP WITHOUT KNOB | 25010-9101

 

parts for models:PTM50 | 70 | 100

 

OPTIMUS # 4686-07 STA-RITE $ 25010-9101 25010-0101 IS ENGRAVED IN THE OUTSIDE OF THE BAND THIS BAND DOES NOT INCLUDE THE PLASTIC CLAMP KNOB IT DOES INCLUDE THE T-BOLT WHICH IS NOT SOLD SEPERATELY OUTSIDE DIAMETER: 12" MEASURES SLIGHTLY UNDER 1-1/4" FROM SIDE TO SIDE
Reviews
avatar
Popular Questions
1 year ago
Are there any safety features built into the 58083 Balboa Heater Assembly, such as automatic shut-off or overheat protection? See more »
1 year ago  •  Staff Answer
The 58083 Balboa Heater Assembly features a high-limit temperature sensor that automatically shuts off the heating element if the water temperature gets too high, thus preventing overheating. Additionally, the heater assembly is designed with a pressure switch that prevents operation if there is inadequate water flow, which can lead to damage to the heating element. These features ensure safe and reliable operation of the heater assembly.
0 | 0
See more answers
1 year ago
See more »
See more answers
1 year ago
See more »
1 year ago  •  Staff Answer
The 58083 Balboa Heater Assembly is 15.5 inches long, 2 inches wide, and 15.5 inches high. It weighs approximately 6.6 pounds. The installation process may vary depending on the spa system and the expertise of the person installing it, but generally, it is a straightforward process that involves connecting the appropriate wires and sensors. It is recommended that a qualified technician install the heater to ensure proper installation and avoid any potential hazards.
0 | 0
See more answers
2 years ago
See more »
2 years ago  •  Staff Answer
The time it takes for the 58083 Balboa Heater Assembly to heat up the spa water to the desired temperature will depend on several factors, such as the initial temperature of the water and the desired temperature setting. Generally, it takes a few hours to raise the water temperature by a few degrees, but it may take longer to reach higher temperatures. As for energy efficiency, the 58083 Balboa Heater Assembly is designed to be energy-efficient, using a high-performance heating element and advanced control features to optimize energy consumption.
0 | 0
See more answers
1 year ago
Is this the correct part for a Kohler, 1257–0 Mariposa Jacuzzi tub? See more »
See more answers
11 months ago
See more »
See more answers
View all
Shopper Approved Q&A Shopper Approved Q&A Answerbase
view
Questions & Answers
!